External Amiga drive adapter cable for Gotek HxC

A Cable Adapter for externally connecting a Gotek/HxC USB Floppy Drive Emulator on any AMIGA, 500/600/1200/CDTV!

1. Gotek Drive is recognized as 2nd (DF1:) drive if it's directly connected to amiga, and as 3rd (DF2:) or 4th (DF3:) drive, if it's chained connected to external drive(s). If you apply the hack on Amiga 500, Gotek will recognized as DF0:
2. The external connected gotek drive is bootable on AMIGA 500+,600,1200 by choosing it through boot menu (press both mouse buttons on startup)
3. If you have an AMIGA 500 with 1.3 Rom Kickstart, which doesn't support booting from external drives, you can Use this adapter i also make, to **have either internal or external drive as bootable DF0,by using a switch **, OR

Permanently convert external DF1 to Bootable DF0, by following the very easy and simple procedure:

Notes:

1. Jumper on the back of gotek drive, **must be on 'S0' position. **
2. For Escom A1200, which uses PC floppy drives, you need a jumper on JC, or "interface = ibmpc" in FF.CFG)
3. If you have problems with gotek drive not recognized properly or images don't seem to work ok, try adding interface = amiga to FF.CFG file